Membrane elements for natural gas and APG gasoline processing

The addressed problems:

  • Reduction in С3+ content (for fuel gas treatment and compliance with the GTS requirements)
  • Reduction in hydrogen sulfide, mercaptans, СО2 content.
  • Gas drying (generally as a supplementary treatment factor)
Membrane elements for natural gas and APG gasoline processing

The process of hydrocarbon DPT reduction in gas based on Grasys membrane cartridges

Membrane elements for natural gas and APG gasoline processing
Тех. характеристики

Diameter, " 12

Feed gas pressure, MPa up to 8.0

Membrane pressure drop, MPa up to 6.0

Feed gas temperature, °С ranging from 20 to 70

The principle of membrane separation of a gas mixture is based on the different penetration rates of its components through a polymeric membrane due to the differential partial pressures of the gas on either side of the membrane.

Membrane gas separation technology is widely used throughout the world to extract nitrogen from air, extract hydrogen from hydrogen-bearing gas mixtures, and extract carbon dioxide and water from natural gas.

Grasys Membrane Cartridges

  • High selectivity
  • High specific membrane surface area
  • Wide pressure range (up to 13 MPa)
  • Low pressure loss during separation
  • Excellent chemical stability

Grasys Cartridge-Based Membrane Units

  • Low capital and operating costs
  • Easy to install and maintain
  • Compact unit dimensions
  • Removal of several impurities in a single process cycle
  • Environmentally friendly technology (no chemicals used)

Applications

  • Hydrocarbon gases treatment to meet regulatory requirements for supply to the gas transport network
  • Hydrocarbon gases treatment to meet the Customer’s requirements for use as fuel gas (dehydration, CO2 removal, sulphur removal)
  • Reduction of the concentration of undesirable components to reduce the load on downstream equipment

Grasys Solutions

  • Production and supply of membrane cartridges
  • Replacement of membranes from other manufacturers
  • Design and manufacture of membrane units
  • Maintenance, repair, upgrading of membrane units
  • Complete turnkey projects (EPC contracts)

Membrane units for gas gasoline processing

The units enable gas gasoline processing to a specified hydrocarbon dew point temperature (DPT) along with gas treatment by other regulated parameters: water DPT, concentration of sulfur-bearing impurities (hydrogen sulfide, mercaptans) and CO2.

Membrane elements for natural gas and APG gasoline processing

Grasys Manufacturing Facility

Grasys Manufacturing Facility
Grasys Manufacturing Facility
Grasys Manufacturing Facility
Grasys Manufacturing Facility
Grasys Manufacturing Facility
Grasys Manufacturing Facility
Grasys Manufacturing Facility
Grasys Manufacturing Facility
Grasys Manufacturing Facility

The main specialisation of the production complex: the manufacture of high-efficiency hollow-fibre gas separation membrane cartridges.

A unique research and production complex is located in the territory of the Dubna Special Economic Zone of Technical-Innovative Type. One of the most strategically important areas is the production of membrane cartridges for hydrocarbon gas separation, including the helium concentrate separation.

Booklet. Grasys Manufacturing Facility.Download PDF; 1,33 МБ

Operating Procedure When Dealing With R&P Co. Grasys

1

Submit a request on the site or reach our specialist by phone

2

Grasys expert speaks to you and finds out your needs

3

You fill out a questionnaire with the desired equipment parameters

4

Our expert prepares a quotation with the most efficient solutions to your application. Contract to be concluded

5

We perform engineering, designing, manufacture equipment with its further testing and placing into service, etc

6

We ship equipment to the operational location and provide a package of documents

7

We are engaged in start-up operations and equipment commissioning

8

We provide aftersales service to ensure equipment efficient performance and reliability excellence (optional)

Advantages of Cooperating with R&P Co. Grasys

High-tech Russian manufacture

Implementation of import substitution programs

Hands-on experience in implementing over 1600 projects within 20 years

Manufacturing equipment of any size and level of sophistication

Turnkey projects (EPC-contracts)

Prompt technical support

Information contained herein does not constitute а public offer

Learn more
Submit a request and our manager will reach you out shortly

Submit a request
A leading manufacturer and EPC-contractor in gas separation and compression

Products

About Us

Equipment Request
telegram Telegram-bot